Henkel LOCTITE 3D Cleaner C
Weight: 39.68 lb
LOCTITE 3D Printing Cleaner C is a non-flammable cleaner at ambient temperature (Category 4 flammable) intended for post-process cleaning of SLA/DLP printed parts.
- Cleans “impossible” parts.
- Effectively solubilizes 3D printing resins
- Water rinseable
- Does not damage ‘green’ or cured resins when used as recommended
LOCTITE® 3D Printing Cleaner C is a cleaner for SLA and DLP printed parts. It is well suited to remove excess resin from intricate and complex 3D printed parts. This cleaner is a more environmentally friendly alternative to isopropanol (IPA).
The benefits of Loctite® 3D Printing Cleaner C are many.
The cleaner is non-flammable at room temperature and thus does not require an explosion-proof environment. As a result, it enables safe handling. In addition, it does not have a safety label and therefore does not pose a risk to people or the environment.
The cleaner dissolves more than 15% resin compared to IPA with less than 10%. It also cleans complex components with grid structures. It removes most resins in 5 to 10 minutes. It can be heated up to 50 °C for better cleaning results.
Loctite® 3D Printing Cleaner C is used with various 3D printing resins such as LOCTITE IND402 A70, MED413, IND405, 3172, 3843